Grammar Program of EPS batch foaming pre-expander
1.The production efficiency per hour varies while pre-expanding with an EPS batch foaming pre-expander depending on the varied expansion ratios.
Initially blowing Close the cleaning door, empty the cylinder of any extraneous items, and then open the air and steam valves. Hit the delivery button after preparing the ingredients. The feed amount should be set, the weighing switch should be in the automated position, the counter should be set to the necessary number of times, the time for each step should be confirmed, and then you should wait for the signal when the material is full. The pre-expanding machine will automatically repeat the pre-expanding process according to the preset number of pre-expanding times when the blower and screening machine are turned on, the selection button is set to automatic, and the preheating button is pressed.
2. The end of pre-delivery When the preceding operation is complete and there is not enough weight of raw materials in the hopper, switch to semi-automatic and press "remaining pre-delivery" to pre-deliver the remaining materials in a process that takes 5 seconds less time. Finish. If it occurs more than 50–300 seconds after the preceding procedure, a manual switch must be made instead. To manually clean the barrel and remove the beads still inside the pre-hair barrel, pause the completely automatic mode. Cut off the power supply and close the main steam and air valves.
תגיות פופולריות: EPS Batch Foaming Pre-Expander, China, manufacturers, suppliers, factory, price, vacuum, for sale